Sub-zero IC-27FI User Manual download pdf (Page 14)

Integrated Installation 14

MOUNTING

BRACKET

Kickplate/grille installation.

Kickplate/Grille Installation

nce the integrated unit is secured, the kickplate/grille

can be installed. The mounting bracket may be adjusted

slightly forward or back so the kickplate/grille will fit flush

with the surrounding area. Refer to the illustration below.

The kickplate/grille must be removable for service. The

floor cannot interfere with removal.

Turn power back on to the electrical outlet.

IMPORTANT NOTE: The unit must be allowed to have

ventilation through the fins of the kickplate/grille. You may

cover the solid area, but do not block the fins. The lower

drawer panel or the door panel of a column unit may hang

in front of the fins, but the baseboard molding must not

cover them.

If you choose, the kickplate/grille may be painted another

color. Follow these steps: Rough up the surface to be

painted with fine grit sandpaper. Wipe with alcohol to

ensure that the surface is clean and dry. Use an appliance

or industrial grade, oil base, high gloss enamel paint.

Panel Considerations

he integrated design utilizes custom wood or other

decorative panels and handles provided by the customer.

Stainless steel panels are available as accessories through

your authorized Sub-Zero dealer. For local dealer informa-

tion, visit the find a showroom section of our website,

subzero.com.

Check panel dimensions before proceeding. Additional

panel information can be found in the Sub-Zero design

guide and on our website, subzero.com.

IMPORTANT NOTE: A portion of the backside of the

decorative panels will need to be finished, as they will be

exposed when the doors are open.

D-style handles are recommended. Handles should be

located on the opposite side from the hinge, centered on

the cabinet door, and on the top center area of the drawer

panel. Screw heads may have to be countersunk to ensure

that hardware does not interfere with the panel fitting flush.

It is recommended that the door panel of a tall model be

installed first, then the upper and lower drawer panels.

Panel Requirements

COLUMN MODELS MAX WEIGHT

Door Panel 65 lbs (29 kg)

TALL AND DRAWER MODELS MAX WEIGHT

27" (686) Door Panel 40 lbs (18 kg)

27" (686) Drawer Panel 12 lbs (5 kg)

36" (914) Door Panel 53 lbs (24 kg)

36" (914) Drawer Panel 16 lbs (7 kg)

PANEL THICKNESS MINIMUM

All Panels

/8" (16)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments

Sub-zero IC-27FI User Manual Page 14

Comments to this Manuals

Related products and manuals for Refrigerators Sub-zero IC-27FI