search

Sub-zero BI-36RG User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 8
subzero.com
|
9
SITE PREPARATION
Plumbing
Installation must comply with all applicable plumbing codes.
The water supply line should be located within the shaded
area shown in the illustrations below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve. Do not use self-piercing valves.
The water supply line must not interfere with installation of
the anti-tip brackets.
A reverse osmosis system can be used provided there is
constant water pressure of 35–120 psi
(2.4–8.3 bar) supplied
to the unit at all times. In this application, the water ltration
system must be bypassed by removing the lter. A copper
line is not recommended for this application.
PLUMBING REQUIREMENTS
Water Supply Line
1
/4" OD copper, braided
stainless steel or PEX tubing
Water Pressure 35–120 psi
(2.4–8.3 bar)
Excess Water Line for Connection 36" (914)
3" (76)
18" (457)
FRONT VIEW
FLOOR
6"
(152)
TOP VIEW
BACK WALL
1
/2"
(13)
18" (457)
6"
(152)
Water supply location (rear).
Water supply location (bottom).
Preparation
Uncrate the unit and inspect for damage. Remove the wood
base and discard shipping bolts and brackets. Remove and
recycle packing materials. Do not discard the kickplate, anti-
tip brackets and hardware.
Completely retract the front leveling legs to allow the unit to
be moved into position. The front and rear leveling legs can
be adjusted from the front once the unit is in position.
Remove the drain pan from the base of the unit to avoid
damage, and allow for proper appliance dolly placement.
The grille assembly should be removed prior to moving the
unit. To remove, pull out on the bottom edge of the grille and
rotate upward. Loosen the back two grille mounting screws
and remove the front two grille mounting screws. Refer to
the illustrations below. With the grille held rmly, pull forward
to remove.
BACK GRILLE
SCREW
FRONT
GRILLE SCREW
Grille removal.
Grille mounting screws.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments
Related products and manuals for Refrigerators Sub-zero BI-36RG
Refrigerators Sub-zero Built-In Refrigeration User Manual   (40 pages)
Refrigerators Sub-zero 427G User Manual   (32 pages)
Refrigerators Sub-zero 650/O User Manual   (2 pages)
Refrigerators Sub-zero 200 Series User Manual   (16 pages)
  • OUTDOORCHEF Quick MILL K&M Bora Waterco
  • Briggs & Stratton Air compressors Jabra Mobile phones Evolve Dimmers Dell Network equipment chassis De'Longhi Ovens
  • Linn AV 5105 Acer AL2016W Russell Hobbs 20220-56 Canon SELPHY CP1200 Philips 9006XVB1
  • Remington R-845 User Manual Samsung GT-P3110 User Manual Mercedes-benz SL 600 User Manual Canon LA DC52D User Manual Sennheiser HD555 Datasheet